Detailed description
Ocean Solar Charge Controller Regulator
12 / 24V 30A / 50A MPPT Solar Charge Control Panel Battery Regulator Dual USB EB
Features:
Automatic voltage identification system, automatic 12 / 24V recognition.
User-friendly LCD display and interface operated with two buttons.
Comprehensive technical data for configuration and adjustment.
Highly efficient MPPT intelligent charging mode with 3 stages.
Load control mode can be selected; the timer function can be reset for street lighting at night.
Discharge capacity control.
Discharge amp hour counter.
Operating history storage: records total system running time, error occurrences during operation and the number of times the battery has been fully charged.
Reliable overvoltage protection, short circuit protection, overload protection, overload protection, overload protection.
Precise temperature compensation, automatically correcting charging and discharging voltage to improve battery life.
Comprehensive reverse polarity protection.
The positive terminals of the solar panels, battery and solar charge controller are connected together, using a negative MOSFET in the series control circuit.
Specifications:
Current: 30A, 50A
Rated voltage: 12 / 24V
USB output: 2.4A * 2
Charging overcurrent (V): 13.7V / * 2 24V
Discharging overcurrent (V): 10.5-11V / * 2 24V
Temperature compensation: -3mv / ℃ / cell
No-load consumption: <45mA
Loop voltage drop: <200mv
Display: LCD screen
Charging type: MPPT
Waterproof rating: IP32
Material: Plastic
Colour: Black + Orange
Size: 17.5 * 14 * 4cm / 6.9 * 5.5 * 1.6in (30A), 21 * 19.2 * 5.5cm / 8.3 * 7.6 * 2.2in (5A)
Package weight: 480g-868g
Package list:
1 * solar charge controller
1 * User manual
Notes:
1. The controller's function is to protect against overvoltage and excessive discharge.
2. When the battery voltage is too low, the controller stops the output; after charging from the solar panel, the cell recovers to 12.6V.
3. 12.6V is the discharge recovery voltage.
4. The controller's normal voltage is 10.7V to 13.7V. These two voltage thresholds can be set manually.
If you experience problems during use, try adjusting the float voltage to 13.7 V:
First, press the MCU control button for approximately 3-4 seconds, and a management interface will appear on the screen.
Second, press the Add button on the screen until the voltage reaches 13.7V.
Finally, press the MCU control button again to save the controller's recorded data when the screen stops flashing.
Pay in instalmentsView available options
Use of cookies:We use our own and third-party cookies to improve the browsing experience, and offer content of interest. As we continue to navigate, we understand that our Cookies policy.
