Control cables 33-C · Chrysler · Dometic / Teleflex

33-C mechanical throttle or shift cable · Dometic / Teleflex · Chrysler.

Universal Morse-type 33-C series. Red 8 mm outer casing; 10 mm end fitting according to the Pronautic catalogue. Universal 10-32 UNF threaded connection.

For installations with compatible universal 33-C/3300 controls and connections. Some installations require specific end fittings or adapters, sold separately.

Choose the length in feet and metres. The same items are linked by engine brand, cable manufacturer and model.

The stated length is the complete cable length from end to end, not just the outer casing or the control travel. 1 foot = 0,3048 m. The separate outer casing measurement is not published. When replacing a cable, read the length printed on the old cable and compare both end fittings.

For a new Dometic installation, measure the actual route from the control to the engine connection; for outboards, add 4 feet (1,22 m) to allow for engine movement and round up to the next commercially available length in feet. Do not add this allowance again to the length of an existing cable. Avoid tight bends and follow the control manual.

Check the engine model and year, control generation, mountings, travel and end fittings before choosing. The engine brand alone does not guarantee compatibility. Throttle/shift cable; not a steering cable.

Sold individually: 1 cable. Controlling throttle and shift normally requires two cables, which may need to be different lengths.

Technical illustration of the series; the length supplied is the selected length.