Categorías

By cable brand

By cable brand

Choose the series and then the length in feet and metres. Check the engine model and year, the control generation, the end fittings and the travel: the engine brand alone does not guarantee compatibility. The same product listings can be found by engine, cable manufacturer or model.

Nominal order length; this is not a separate measurement of the sheath. Check the marking on the previous cable and do not calculate the sheath length by subtracting the travel.

For a new installation, measure the actual route between the control and the engine and consult the guide for the chosen series. The allowance for outboard turning depends on the manufacturer: Dometic / Teleflex specifies 4 feet (1,22 m); Multiflex specifies 3 feet (0,91 m). Round up to the next available commercial length. When replacing a correctly installed cable, use its total length or marking without adding this allowance again. The order length is not the separate measurement of the sheath.

Control cables Dometic / Teleflex
Control cables Dometic / Teleflex
Control cables IMNASA
Control cables IMNASA
Control cables Mercury / Quicksilver
Control cables Mercury / Quicksilver
Control cables Multiflex
Control cables Multiflex
Control cables Riviera
Control cables Riviera
Control cables Ultraflex
Control cables Ultraflex