Control cables for Force

Control cables for Force

Choose the cable series, then the length in feet and metres. Check the engine model and year, control generation, end fittings and travel: engine brand alone does not guarantee compatibility. The same product pages are available by engine, cable manufacturer or model.

Nominal ordering length; this is not a separate sheath measurement. Check the marking on the existing cable and do not calculate sheath length by subtracting travel.

For a new installation, measure the actual route from control to engine and consult the selected series guide. Allowance for outboard movement depends on the manufacturer: Dometic / Teleflex specifies 4 ft (1.22 m); Multiflex specifies 3 ft (0.91 m). Round up to the next available length. When replacing a correctly installed cable, use its overall length or marking without adding this allowance again. Ordering length is not a separate sheath measurement.