Detailed description
Mercury GEN II mechanical throttle or shift cable · Dometic / Teleflex · Mercury/MerCruiser.
Mercury GEN II series, type 189 connection, for Mercury and MerCruiser with a compatible second-generation control; applications from 2003 onwards according to Blasco. Confirm the control generation: the engine year alone is not enough.
- Nominal length: 18 feet (5,49 m)
- Reference: 039320
The stated length is the complete cable length from end to end, not just the outer casing or the control travel. 1 foot = 0,3048 m. The separate outer casing length is not published. When replacing a cable, read the length printed on the old cable and compare both end fittings.
For a new Dometic installation, measure the actual routing from the control to the engine connection; for outboards, add 4 feet (1,22 m) to allow for engine movement and round up to the next commercially available foot length. Do not add this allowance again to the length of an existing cable. Avoid tight bends and follow the control manual.
Check the engine model and year, control generation, mountings, routing and end fittings before choosing. The engine brand alone does not guarantee compatibility. Throttle/shift cable; not a steering cable.
Sold individually: 1 cable. Controlling both throttle and shift normally requires two cables, which may need to be different lengths.
Technical illustration of the series; the supplied length matches the selected length.