Detailed description

• Installation Instructions:
  • All types of standard bedding compounds and epoxy or polyester resins can be used for the installation.
  • Mark the position inside and outside the hull. Drill the clearance hole into the hull. Apply the bedding compound to the underside of the flange. Do not cover the thread area. Insert the thru-hull's body from the outside. From the inside, place the washer and the screw nut to tighten. The skin fitting should be installed in a position where it is protected from impact damage.
  • Tighten the nut to a maximum 20Nm of torque.

    		1 1/2'' inch1'' inch2'' inch	118mm62mm72mm87mm92mm	50mm64mm72mm	54mm65mm72mm82mm84mm	24mm39mm40mm48mm	Inox 316	-45312	-197023197024	-197061197065	INOX 316
    Code	Title	ØA	C	ØD	E	Int. Ø F (mm)	Material	Optional Plug	Optional Valve	Optional Elbow	Colour
    196999	Thru-Hull w/Inox Flange, Threaded 1 ½'', L.62mm	1 1/2'' inch	62mm	64mm	54mm	39mm	Inox 316	45312	197023	197065	INOX 316
    197007	Thru-Hull w/Inox Flange, Threaded 1 ½'', L92mm	1 1/2'' inch	92mm	64mm	84mm	40mm	Inox 316	45312	197023	197065	INOX 316
    197014	Thru-Hull w/Inox Flange, Threaded 2'', L.72mm	2'' inch	72mm	72mm	65mm	48mm	Inox 316	-	197024	197061	INOX 316
    197020	Thru-Hull w/Inox Flange, Threaded 2'', L.118mm	2'' inch	118mm	72mm	72mm	48mm	Inox 316	-	197024	197061	INOX 316
    197213	Thru-Hull w/Inox Flange, Threaded 1'', L.87mm	1'' inch	87mm	50mm	82mm	24mm	Inox 316	-	-	-	INOX 316