Detailed description

Gray water pump, 290 x 120 x 90 mm, inlet 38 mm outlet 25 mm

A new sealed motor with o-rings, double-sealed ball bearings and a heavy-duty cutter make this macerator pump ideal for evacuating fish boxes and fishing tanks, as well as retensioning tanks.
The macerator sprays the debris into small particles so that they pass easily through the 25mm discharge hole. You can download
tanks of up to 600 liters in one operation and is self-priming up to 1.2m. In addition to these features, the Jabsco macerator has
now with an exclusive protection device Run-Dry Protection Device (patent pending). This new feature means that the damage caused to the impeller by accidental dry operation has now been left behind.

The Jabsco DC 18590 Series Macerator Pump Unit is the ideal solution for emptying marine deposits when not in a restricted area of ​​management. Auto prime to 5FT, this vacuum pump a typical 30 gallon (115 liter) tank in less than 3 minutes. Pump cycle is 15 continuous minutes, which means a 180 gallon (680 liters) can be emptied in a single operation
Fish Box and Livewell Tank Eveacuation
The Jabsco Macerator pump is the ideal place for the pump emptying the fish box and livewell vessels. If Livewell tank is below the waterline, it is beneficial to use the Jabsco macerator pump for evacuation due to its ability to self-priming and grinding properties.
Fish boxes are usually mounted on the floor of the boat and are often well below the waterline, or only partially above the waterline. Once again, the Jabsco Macerator pump has the features that lend itself to this request. The bait of debris from the ice particles, fish scales and everything else that could be found in the fish-box can be purchased from the past Macerator Jabsco Pump, and the self-priming capacity are perfect for fish box facilities common to many Today's sport fishing boats.

Features:
Impeller: Jabsco Nitrile compoundNEW
Macerator: the stainless steel cutter reduces the size of the particles by 1/8 "(3 mm) maximum 4blade New design.
Seal: Lip Type

Specifications:
Pump: Flexible stainless steel self-priming with Wearplate impeller
Inlet Port (s): 1-1 / 2 "(38mm) and Barb Hose 1-1 / 2" NPT (male) outlet - 1 "(19mm) Barb Hose
Motor: Type of permanent magnet, completely closed, with stainless steel shaft. Includes Run-Dry protection device that prevents pump take-off.
Coated dust housing with final sealing of the bells and bearings.
Complies with USCG Regulation 183,410 MARINA and ISO 8846 for ignition protection
Weight: 2.3kg